Training

Costs

RC8(a) Basic and Advanced Courses

    These are our standard Basic and Advanced courses as described under our "Course Descriptions" page.

            - $1,200/student (see course schedule below).

            - Courses are scheduled at our CA and OH offices.

            - 2-day course.

            - 1/2 seat credit* (equivalent to $600) can only be applied to the Basic courses, with the purchase of each new

               DENSO robot system from DENSO Products and Services Americas, Inc.

            - Credit(s) expire one year after delivery.

            - Partner company training programs are eligible for these pre-scheduled courses only, with a nominal fee.  

            - Additional classes may be added on-demand; 2 student minimum; credits and discounts do not apply.  Contact us for details!


Maintenance courses: Courses are subject to availability. 

    We offer two levels of maintenance training.  Our Basic is our Maintenance (4 or 6 axes) course as described under our "Course Descriptions" page.  Our Advanced is specific to each robot model - contact us for details. 

           - $1,500/student for the Basic 2 day basic maintenance course per robot.  (VSA models require additional mandatory jig purchase)

           - $2,250-$3,000/student for the Advanced 3-4 day maintenance course per robot.  This course includes the basic maintenance content.  Contact us for details on this course specific to your robot model!

           - Scheduled at our OH office.

           - Minimum 2 students to create a class.

           - Credits/discounts/training-agreements do not apply. 


           - Additional classes (both Basic or Advanced) may be added on-demand; 2 student minimum; credits and discounts do not apply.  Contact us for details!


Custom and Legacy courses: Courses are subject to availability. 

     These courses are for topics not covered in the RC8 Basic or Advanced courses.

       - These courses are scheduled as-needed.  Please contact us to set up one of these classes!
           - $750/student/day.

           - Scheduled at our CA and OH offices. 1-4 day course, depending on the requested content

           - Conveyor tracking, ORiN, Cooperative Motion

           - RC7 basic or Advanced, etc..;

           - Minimum 2 students to create a class.

           - Credits/discounts/training agreements do not apply. 


Onsite courses: Courses are subject to availability. 

    These courses may cover any material you request, from Basic, Custom, or Maintenance (or a combination thereof)

       - These courses are scheduled as-needed.  Please contact us to set up one of these classes!
           - $1,500/student for all classes (2 days) except VSA Maintenance; $4,000/student for VSA maintenance (4

              days).

           - Plus travel costs, travel time labor, and robot rental fee (may not use production robot for training)

           - Minimum 2 students to create a class.

           - Credits/discounts/training-agreements do not apply.


Operator course: Courses are subject to availability.  

    These courses cover select portions of our "Basic" course.  The class is designed for machine operators, and has a heavy Teach Pendant and operation focus, with limited programming.

         - These courses are scheduled as-needed.  Please contact us to set up one of these classes!
           - $750/student

           - 1 day course

           - Minimum 2 students to create a class. 

           - Credits/discounts/training-agreements do not apply.


RC7 & RC8 Spare Robot & Controller Swap Out Training: Courses are subject to availability.  

   Reviews and demonstrates proper procedure on swapping in and out spare robots and controllers with existing equipment.  Controllers must be of same type (RC7 to RC7, RC8 to RC8 etc...)

         - These courses are scheduled as-needed.  Please contact us to set up one of these classes!
           - $750/student

           - 1-day course

           - Minimum 2 students to create a class.  

           - Credits/discounts/training-agreements do not apply.

           - Our basic class is a prerequisite for this course.  This course is recommended for Programmers, Machine Builders, and System Integrators.

**** All pricing includes fees, taxes, etc...


* Training agreements may be substituted for Credits in volume sales; DENSO and DENSO affiliates are not eligible for credits and should contact E&D to discuss training needs


Course Schedules

Maintenance Training Center – West Chester, OH

Maintenance classes On Demand
Training Hours: 9:00 AM to 4:30 PM
  • Jan 14 - Jan 15, 2019 – Maintenance Training - VM Robot Arm ~ Class Full
  • Jan 16 - Jan 16, 2019 – RC7/RC8 Spare Robot & Controller Swap Out Training ~ Class Full$750 for End Users, $100 for SI/Distributors
  • Jan 17 - Jan 18, 2019 – Maintenance Training - HM Robot Arm ~ Class Full
  • Feb 20 - Feb 21, 2019 – Maintenance Training TBD ~ 2 seats openRobot Type TBD Upon Registration
  • Mar 13 - Mar 13, 2019 – RC7/RC8 Spare Robot & Controller Swap Out Training ~ 4 seats open$750 for End Users, $100 for SI/Distributors
  • Mar 14 - Mar 15, 2019 – Maintenance Training TBD ~ 2 seats openRobot Type TBD Upon Registration
  • Apr 02 - Apr 03, 2019 – Maintenance Training TBD ~ 2 seats openRobot Type TBD Upon Registration

Midwest Training Center – West Chester, OH

Training Hours: 9:00 AM to 4:30 PM
  • Dec 11 - Dec 12, 2018 – RC8A Basic Programming and Operation ~ 2 seats open
  • Jan 08 - Jan 09, 2019 – RC8A Basic Programming and Operation ~ 6 seats open
  • Jan 15 - Jan 15, 2019 – RC8A 1-Day Custom Class TBD ~ 4 seats open$750 for End Users, $100 for SI/Distributors
  • Jan 17 - Jan 17, 2019 – RC8A Safe Motion 1-day Course~ 2 seats open$750 for End Users, $100 for SI/Distributors
  • Jan 22 - Jan 22, 2019 – RC8A Basic Operator Training ~ 8 seats open$750 for End Users, $100 for SI/Distributors
  • Jan 23 - Jan 24, 2019 – RC8A Advanced Programming and Operation ~ 8 seats open
  • Jan 29 - Jan 30, 2019 – RC8A Basic Programming and Operation ~ Class Full
  • Feb 20 - Feb 21, 2019 – RC8A Basic Programming and Operation ~ 8 seats open
  • Mar 05 - Mar 06, 2019 – RC8A Basic Programming and Operation ~ 8 seats open
  • Mar 12 - Mar 12, 2019 – RC8A 1-Day Custom Class TBD ~ 4 seats open$750 for End Users, $100 for SI/Distributors
  • Mar 14 - Mar 14, 2019 – RC8A Safe Motion 1-day Course~ 2 seats open$750 for End Users, $100 for SI/Distributors
  • Mar 19 - Mar 19, 2019 – RC8A Basic Operator Training ~ 8 seats open$750 for End Users, $100 for SI/Distributors
  • Mar 20 - Mar 21, 2019 – RC8A Advanced Programming and Operation ~ 6 seats open
  • Apr 02 - Apr 03, 2019 – RC8A Basic Programming and Operation ~ 8 seats open

West Coast Training Center – Long Beach, CA

Training Hours: 9:00 AM to 4:30 PM
  • Jan 08 - Jan 09, 2019 – RC8A Basic Programming and Operation ~ 8 seats open
  • Feb 05 - Feb 05, 2019 – RC8A Basic Operator Training ~ 8 seats open$750 for End Users, $100 for SI/Distributors
  • Feb 06 - Feb 07, 2019 – RC8A Advanced Programming and Operation ~ 8 seats open
  • Mar 05 - Mar 06, 2019 – RC8A Basic Programming and Operation ~ 8 seats open
To obtain contact information for our Partner companies that provide onsite training, contact the DENSO training center closest to you.

Cancellation Policy

Once a course has been scheduled, cancellations must be made and a cancellation confirmation received 5 working days before the first day of the course. If a student does not attend a scheduled course or cancels less than 5 working days before the first day of the course, DENSO will charge a cancelation fee of 1/2 the price of that particular course. 

Recheduling Policy

DENSO schedules new classes every 6 months. DENSO reserves the right to cancel and/or reschedule courses whenever necessary and will make every effort to notify enrolled students as early as possible before the starting date of the course.